What size wrench do I need for bike pedals?

Pedal wrench flats are typically 15mm in size. 9/16″ (~14.3mm) is somewhat common on older pedals. 17mm and other sizes have been used, but you aren’t very likely to encounter them.

Do I need a special wrench for bike pedals?

Most pedals (like our reliable Thump flat pedals) require a pedal wrench, which is a long, thin tool specifically designed to fit the external spindle flats between the pedal and the crank leg (fig. 3).

Are all pedal wrenches the same size?

To tighten and remove pedals, the axles have either spanner flats, sockets for a hex key, or both. The flats on almost all modern pedals take a 15mm spanner, though many pedal spanners also have a 9/16-inch jaw for older pedals.

What is the best pedal wrench?

Best Bike Pedal Wrench

• Park Tool PW-5 Home Mechanic Pedal Wrench. BIKEHAND Bicycle Bike Pedal Wrench. AMbs Double Sided Bicycle Pedal Wrench. Tfwadmx Bike Pedal Wrench. Sunlite Sport Pedal Wrench.
• Park Tool. BIKEHAND. AMbs. Tfwadmx. Sunlite.
• –
• $19.98. $9.99. $10.79. $12.00.

How do you put pedals on a pedal without a wrench?

How To Remove Bike Pedals Without Pedal Wrench

1. Step 1: Position the bike accordingly.
2. Step 2: Insert the spanner where it is to belong.
3. Step 3: Rotate the spanner in the anti-clockwise direction.
4. Step 4: Free the Pedal.
5. Step 5: Turn the bicycle around.
6. Step 6: Rotate the crank arm.
7. Step 7: Position the spanner accordingly.

How do I know my pedal size?

Check the Cranks on the Bike If your cranks are made up of three separate sections, two separate crank arms and the spindle that goes through the frame then your pedals will be size 9/16” x 20 tpi.

Do all pedals fit all cranks?

If you’re unsure of which pedal spindle size you need to fit your bike, then this post is for you! When it comes to pedal sizes, there are two sizes: ½” and 9/16”. ½” pedals are only used on very basic bikes with a one piece crank. All bikes over about $400 will typically come with 9/16” pedals on a 2 or 3 piece crank.

What are bike cone wrenches used for?

A cone wrench or cone spanner is a tool used in bicycle assembly and maintenance to adjust the cones of cup and cone bearings. Cone wrenches are thinner and lighter than most other open ended wrenches that are used to work on bicycles.

Can you remove bike pedals without pedal wrench?

Since you don’t have a pedal wrench, typically, your standard 15 mm open-end wrench will do the trick just as easily. From there, take a look at the pedal and ensure that it has a wrench flat on the spindle for your wrench to attach to. If the pedal doesn’t have this, this method, unfortunately, will not work.

Which way to tighten bike pedals?

To tighten your bike pedals, rotate the left pedal counterclockwise and the right pedal clockwise using a wrench. When you feel resistance, rotate the pedal approximately 1/8 of a spin to tighten it properly.

Does ebike have to have pedals?

For an electric bike to be classified as an electric bike, it must have pedals that can propel the bike. It sounds simple, but electric bikes have been evolving and there are some grey areas. If you’re looking to get an electric bike without pedals, that’s probably going to be defined as a scooter by law.

What size is pedal thread?

The 9/16″ is the most common pedal thread size on the market today and is the size that most manufacturers use for their pedals. Almost all modern adult bikes have the 9/16″ pedal with 20 threads per inch (tpi).

How do you remove a bicycle pedal assembly?

Stand the bike upside down or place it in a bike stand. Remove the pedal on the opposite side from the chain. Use a 15mm wrench, turning it clockwise to remove the pedal.