How do I get rid of the error message on my Samsung refrigerator?

A power outage will make your Samsung fridge show the errors 1E and or SE. If this is the case, simply press the power save and lighting buttons for 10 seconds and the error will clear. OR… press the fridge and freezer buttons at the same time for 10 seconds to reset the control panel and clear the error code.

How do I run diagnostics on my Samsung refrigerator?

Please press and hold Power Freeze and Power Cool on your display simultaneously for 8-10 seconds until the screen flashes and a chime sounds.

1. If an error code is present, it will be displayed on your fridge’s screen.
2. If more than one error is present, the display will cycle through the codes.

Why is my Samsung refrigerator control panel blinking?

Main control panel is blinking The temperature display on your fridge will blink if the temperature inside the fridge is above 59 degrees Fahrenheit. Usually, the temperature in the fridge rises because a door has been left open, or the refrigerator is recovering from a recent power outage.

How do I reset my Samsung double door refrigerator?

Holding the “power freeze” and “power cool” buttons and the same time for five seconds works on most Samsung models. These two buttons appear on most Samsung refrigerators. Holding both of them at the same time for several seconds will usually reset the fridge. Some fridges also have reset switches.

What does the fault code on a Samsung refrigerator mean?

Newer style Samsung refrigerators have built in diagnostic systems. If your refrigerator finds, sees, or detects a fault or error in the system, it will show an error or fault code. The error code will display where the usual numbers are on the display screen.

What should I do if my Samsung refrigerator is not working?

These modes tell you or the repair person what is functioning properly on your fridge and what is not. Many people get into one of these modes by accident and cannot get out. To disable any of these modes, you can simply unplug your Samsung refrigerator for 30 seconds to 1 minute to clear.

How to know if your Samsung refrigerator is in diagnostic mode?

1 Display Panel Is Showing PC-ER: If the display panel shows PC-ER, make sure the wire harness under the top left door hinge is properly connected. 2 Samsung Blinking Dash Line Error Code List 3 IMPORTANT NOTE: Any codes not listed above should be assumed your refrigerator is in DIAGNOSTIC MODE, DEMO MODE, or LOAD MODE.

What does the 0f mean on a Samsung refrigerator?

Below is a table of Samsung refrigerator error codes. The “0f” indicates a so called “showroom mode”, which is present in all Samsung refrigerators. This mode is used when there is a necessity to simply demonstrate the unit’s functionality and features.