How do you remove the error code on a Frigidaire washing machine?

To clear latest stored error code: Turn the program knob clockwise 9 clicks from the Start Position. The control will signal the last error code. Press and hold the Options and Pause Cancel buttons for 3 seconds. The code will be cleared.

How do I reset my Frigidaire Max washer?

How to Reset a Frigidaire Washer

1. Press the “Cancel” button on the washer’s display.
2. Turn the knob or push the button to select a new cycle.
3. Press “Start.” You have now reset your Frigidaire washer.

Why won’t my Frigidaire washer drain?

If the water pump belt is broken or worn out, the washer will not drain. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.

How do you troubleshoot a Frigidaire washing machine?

How to Troubleshoot a Frigidaire Affinity Washer

1. Stop the washing machine if rattling or clanking sounds occur.
2. Redistribute the load if you hear a thumping sound.
3. Level the washer if the machine vibrates.
4. Plug the power cord in and check household fuses or breakers.
5. Turn the water supply faucets on completely.

How do I reset my Frigidaire front load washer?

How to Reset the Settings on a Frigidaire Front Washer

1. Verify that your Frigidaire front washer is plugged into a working electrical outlet and turned on; otherwise, you won’t be able to reset it.
2. Press and hold the “Spin Speed” and “Soil Level” buttons together for a few seconds.

Why does my washer keep pausing?

If the door lock is defective, the washer may stop mid cycle. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.

Is there a reset button on a Frigidaire washer?

Press and hold the “Spin Speed” and “Soil Level” buttons together for a few seconds.

How do you run a diagnostic test on a Frigidaire Affinity washer?

Enter the diagnostics mode on Frigidaire Affinity washers 6000 and 7000 series

1. Wake the washer by pressing any button.
2. Press and hold the Start/Pause and Cancel buttons.

Why is my washing machine not draining?

There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

How do you manually drain a Frigidaire washing machine?

How to Drain a Top-Loading Washing Machine

1. STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
2. STEP 2: Locate the drain hose and water supply hoses.
3. STEP 3: Drain the washing machine of water.
4. STEP 4: Remove a drain hose clog.
5. STEP 5: Remove a drain pump clog.

How do I reset my washing machine cycle?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.

Do washing machines have a reset button?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.

How to check for a Frigidaire front load washer fault?

Place the control into Diagnostic test Mode. Turn the program knob clockwise 9 clicks from the Start Position. The control will signal the last error code. Press and hold the Options and Pause Cancel buttons for 3 seconds. The code will be cleared. Exit Diagnostic Mode to return the washer to normal operation. E11 Fill time too long.

Where does the hot water solenoid go on a Frigidaire front load washer?

Turn the program knob (1) click clockwise from the start position. The hot water solenoid will activate and hot water should enter through the detergent compartment. Turn the program knob (2) clicks from the start position. The bleach water solenoid will activate and cold water should enter through the bleach compartment.

How can I Stop my Frigidaire front load washer from beeping?

To stop the flashing and beeping, the customer may touch the Pause Cancel button. The error code remains stored in the control but once the problem is corrected, it does not effect the operation of the washer.

What does F1 stand for on Frigidaire front load washer?

Note: A letter appearing in the code stands for a number higher than nine: Example Code F1: the first digit would be 15 and the second digit would be 1. If this code would appear on a washer in the Good model line, the five indicator lights would blink fifteen times and the START indicator light would blink once.