How do I adjust my TaylorMade driver?

Adjustments are made with the Torque Wrench. Use the wrench to loosen the screw in the center of each weight, then slide the weight to the desired location and lock it in place by tightening the screw until you hear an audible “click” noise from the wrench.

How do you use TaylorMade loft sleeves?

Each Loft Sleeve has 12 positions to fine-tune your ball flight. The 4° Loft Sleeve allows you to adjust the loft, lie and face angle of the M6 driver. Adjust the loft by loosening the screw in the heel with the wrench, rotating the club head to the desired position, and tightening the screw.

How do you change the shaft on a TaylorMade M2 driver?

How to adjust the TaylorMade M2 driver?

1. Insert the wrench into the screw behind the driver’s clubhead.
2. Release the clubhead from its position over the club hosel.
3. Line the arrowhead on the clubhead with any of the markings other than the STD LOFT marking on the adapter to set the desired loft.

Can you change the shaft on a m2 driver?

To open or loosen the shaft screw place the wrench into the screw and turn anti-clockwise. To tighten back up, turn it clockwise. When fully tightened there is an audible “CLICK” to let you know the sleeve is safely locked in place and to avoid over-tightening. When fully opened, the head and shaft come apart easily.

How should I set my driver if I slice?

On a slice, the clubface is open to the path of the swing. Shots can start to the right, launch overly high and end up flying even farther right. The fix: For typical adjustable drivers, you can close the clubface, alter the hosel to a more upright position and/or shift the movable weighting toward the heel.

What happens if my irons are too upright?

If a club is too short or long, you’ll have to change your posture to get it to sit flush. But if your clubs are too upright, the toe would be off the ground, and you’d have a tendency to pull the ball (inset, top). Too flat, and the heel would be up, and you’d tend to hit pushes (inset, bottom).

What is the phone number for Taylormade Golf?

1-877-860-8624. Customer Service Hours of Operation: M-F 6am-4pm PST. Closed weekends and most US Holidays.

Which is the best driver for Taylormade Golf?

The new M5 and M6 drivers are the culmination of decades worth of work, embodying the complete spirit of what it means to play TAYLORMADE. DRIER

What kind of golf ball does TaylorMade use?

TaylorMade Golf. A TRIUMPH OF ENGINEERING P790 Ti Introducing P790 Ti, the culmination of four decades of golf research. Our engineers used the most advance materials available to deliver excellent ball speed and breakthrough distance.

How do you adjust loft on a TaylorMade Golf driver?

Adjust the loft by loosening the screw in the heel with the wrench, rotating the club head to the desired position, and tightening the screw.