What ports does commvault use?

TCP Ports Used for Services

How do I allow port ranges in my firewall?

Enable a port range in advance

1. Click Advanced settings in the left column of the Windows Firewall window.
2. Click Inbound Rules in the left column.
3. Click New Rules in the right column.
4. Select Port and click next.
5. Select TCP and enter 8000, 8001, 8002, 8003, 9000, 80, 443 in the Specific local ports field.
6. Click Next.

What is CVD in commvault?

By default, the priority of the process started by Commvault Communications Service (CVd) is “normal.” You can change the priority of this process from the CommCell Console. From the CommCell Browser, navigate to the Client Computers node.

What is common vault?

Commvault is an American publicly traded data protection and data management software company headquartered in Tinton Falls, New Jersey. Commvault enterprise software can be used for data backup and recovery, cloud and infrastructure management, retention and compliance.

What is CVD service?

Chemical Vapor Deposition (CVD) is an atmosphere controlled process conducted at elevated temperatures (~1925° F) in a CVD reactor. During this process, thin-film coatings are formed as the result of reactions between various gaseous phases and the heated surface of substrates within the CVD reactor.

What ports to open in firewall?

You will need to open port 3306 TCP in the Windows firewall or any third party firewall for all software so it can communicate with MySQL. The server should have port 3306 TCP open both inbound and out bound (if using Windows 7 or higher)

Which port I have to open on firewall?

The most common destination ports are 2501, 5001, 9100, 9101, 9102, and 9600; however, some printers could use other ports. Port 161 must be opened on the firewall if any printers are configured as a *LAN 3812 SNMP device description, and ports 631 and 6310 must be opened on the firewall if any printers are configured as a *LAN 3812 IPPP printer device description.

Do I have to open ports in my firewall?

Firewalls are there to protect you from threats on the internet (both traffic from the internet and from local applications trying to gain access when they shouldn’t). Sometimes, though, you’ll want to allow otherwise restricted traffic through your firewall. To do so, you’ll have to open a port. When a device connects to another device on a network (including the internet), it specifies a port number that lets the receiving device know how to handle the traffic.

Which TCP ports to open on a firewall?

Web synchronization and FTP/UNC access for replication snapshot require more ports to be opened on the firewall. To transfer initial data and schema from one location to another, replication can use FTP (TCP port 21), or sync over HTTP (TCP port 80) or File Sharing. File sharing uses UDP port 137 and 138, and TCP port 139 if used along with NetBIOS.