What is the flow rate of a Fluval FX6?

Specs: Aquarium Capacity: 400 gallons (1,500 liters) Filter Circulation: 563 gallons per hour (2,130 liters per hour) Pump Output: 926 gallons per hour (3,500 liters per hour)

How many GPH is FX6?

Incredibly High Water Turnover The pump output is rated at 925 gallons per hour, but the filter turns over roughly 523 GPH. This means the Fluval FX6 works for aquariums of up to 400 gallons but can also be used in aquariums as small as 55 gallons, depending on your inhabitants.

How long does a Fluval FX6 last?

The first thing you need to know is that every tank with an FX6 is different. There is more than one model of Fluval Canister Filter, and each one comes with equally unique maintenance requirements. While some tanks with FX6 may require constant maintenance, others can run for six months without any problems.

How does water flow through Fluval FX6?

Direction Of Water Flow In The FX6 You may be wondering just how does Fluval FX6 work? In the FX6 the water intake valve will pull water down to the bottom of the canister first, and then it will be pulled up the sides of the media trays which are packed with coarse filter sponge.

How many watts is the fluval FX4?

Building off the high-performance FX platform, the all-new FX4 canister filter bridges the gap between the Fluval 406 and the FX6 canister filters, making it an ideal choice for aquariums up to 250 US Gal (1000 L)….SPECS.

What media comes with FX6?

Media is included with the Fluval FX6. The FX6 comes with sponges (mechanical media), Fluval ceramic rings (biological media) and activated carbon (chemical media) as well as a carbon pad for your bottom tray.

What is the biggest fluval canister filter?

FX6 Filter
Fluval Canister Filter, FX6 Filter (400 Gal) Designed for aquariums up to 400 gallons, FX6 is the high-capacity workhorse of Fluval’s canister lineup, enhanced with all the power and reliability you’ve come to expect from a high-performance filter.

How much electricity does a FX6 use?

Redtail Catfish. The FX 6 uses about 45 watts, 24 hours a day, 31 days/month that would be 33.5kwh. Assuming you’re in the US it looks like the average electricity price is $. 12/kwh.

Is the FX4 self priming?

Yes, the Fluval FX4 has a self priming system. During initial setup and during periodic cleaning, you will need to turn the system off; when you restart the FX4, it will pump for a few minutes, then turn off (it’s priming). The FX will then turn back on once the priming is complete and you’re good to go.

How many gallons per hour does the Fluval fx6 filter work?

And the Fluval Fx6 is able to pump around 538 GPH (gallons per hour). One important thing to note is that while it does says it can filter aquariums up to 400 gallons in size it’s really going to depend. When it comes to large filters, it’s always wise to cut the amount they say they can do in half to get a more accurate representation.

What’s the difference between Fluval fx6 and Eheim 2262?

Whereas, Fluval’s FX6 features a concentric design where the water flows through an outer circle of mechanical filtration (foam) and then enters an inner circle housing the biological filter media before, naturally, being returned to the aquarium. Conclusion: It’s Time To Buy!

Which is better fx6 or fx7 biological filter?

However, the FX6 has a unique concentric design where a large portion of the media capacity is required to be taken up by foams. While some users may prefer to have a larger customizable area, the FX6 does dedicate its central section to your biological filter media of choice.

Is the fx6 filter good for high GPH?

The FX6 filter passes this test without a doubt. When you get the FX6 you also get a very solid intake strainer that will significantly reduce the chance of your filter clogging. When you’re dealing with such a high GPH, this is a big difference-maker.