How long do Intex metal Frame Pools last?

Intex is a popular manufacturer of temporary above-ground pools. How long they last depends on a number of factors, but the simple answer is that the inflatable pools will last 2-4 years and the metal frame types will last between 4-8 years. The most important factors include: Proper installation and a level yard.

How do you maintain an Intex metal pool?

7 Tips To Keep Your Intex Pool Clean

1. Always measure the pH value in your Intex pool.
2. Think carefully about where you place your pool.
3. Cover your Intex pool when it is not in use.
4. Only use tap water to fill the pool.
5. Measuring is knowing: be careful with chlorine.
6. When do you choose automatic cleaning.
7. Watch out for dead algae.

Can you leave a metal frame pool up in winter?

Not in a cold climate here, but I kept my Intex metal frame 18×9′ up over the winter. I think as long as you drain out the hoses/pump and cover the pool, you should be fine — unless you get more than 24 hours (in a row) of below freezing temps.

Should I take down my Intex pool for winter?

Colder Climates In climates where temperatures drop below 32 degrees Fahrenheit, Intex recommends you disassemble and store your pool. Temperatures at these levels can cause ice damage to the pool. Disassemble and store the pool in the fall when temperatures drop and you are no longer using the pool.

How do I get the last 2 inches of water out of my pool?

Draining the Remaining Water from Your Pool

1. Use a wet vacuum to suck the stagnant water.
2. Sweep the liquid into the drain.
3. Remove the pool liner and flip it over somewhere your property to get rid of extra water.

How often should I shock my Intex pool?

We recommend shocking Intex pools every week, especially if you’re having a heat wave or heavy rains. Heat and excess water can knock your chlorine levels to sub-par levels pretty quickly. Use a pool shock with a decent amount of available chlorine, and run your filtration system after you shock your pool.