How does Power Probe 3 work?

The Power Probe 3 is a Digital Voltmeter that works off of 12-24 Volt sources, with the ability to apply Power and Ground. Using an Auxiliary Ground cable to check continuity and test components, the tool is protected by an 8 Amp Circuit Breaker.

What is the difference between Power Probe 3 and 4?

The Power Probe 3 is our most popular Circuit Tester. The Power Probe 4 adds more multi-meter functions like Resistance testing, Frequency, AC Voltage, and special test modes like Injector Testing and a Driver Circuit Tester, dramatically increasing the testing capabilities.

How do you read a power probe?

Press the power switch rearward to activate the tip with a negative (-) voltage. The negative sign (-) LED should light green and the LCD display will read “00.0” (ground). If the tone feature is turned on, a low pitched tone will sound. The Pow- er Probe is now ready to use.

What does P mean on power probe?

pulse
So, besides the normal DC voltmeter mode, the PP3 also has “Min” mode, “Max” mode, “P” mode (meaning pulse), and an AC threshold setting. You access these modes by holding down the oval speaker button for a couple of seconds and the probe will cycle to the next mode.

Are power probes good?

The probe is pretty good, it has forty feet of cable included and the ability to tap into both the battery and a cigarette lighter. It’s simplicity is it’s strength, it will beep and show green for a ground, and beep and show red for power. The display will show voltage to the tenth of a volt.

What does P mean on Power Probe?

What does P on Power Probe mean?

What does P mean on power probe? First, the voltmeter function on the PP3, is obvious because it is the default test mode of the PP3. So, besides the normal DC voltmeter mode, the PP3 also has “Min” mode, “Max” mode, “P” mode (meaning pulse), and an AC threshold setting.

What kind of power does power probe 3 use?

The Power Probe 3 is a Digital Voltmeter that works off of 12-24 Volt sources, with the ability to apply Power and Ground. Using an Auxiliary Ground cable to check continuity and test components, the tool is protected by an 8 Amp Circuit Breaker.

Where can I find training videos for power probe Tek?

A: Our products are designed to help you save time and money in electrical diagnostics. Q: Where can I find training videos? A: Visit our YouTube channel or watch the latest videos on our Knowledge page.

What is the New Power Probe IV diagnostic tool?

The New Power Probe IV electrical diagnostic tool, supplies power and ground, injectors tester, PCM/ECM driver tester, digital volt ohm meter, self resetting circuit breaker, large multi-line Color LCD screen, resistance testing on live and unloaded circuits, bright head lamps. open circuit tester, Min/Max.

What to do if you have an issue with a power probe?

If you have any issues with a Power Probe product please send warranty/repair units to the address below. No RGA required. Q: Where can I buy replacement parts?

https://www.youtube.com/watch?v=G5p9Zd_Quwc