How much horsepower can an AR5 transmission hold?

The AR5 held up to 800-plus horsepower dyno tests, but broke third gear on slicks at the track. Grunwald was confident that an AR5 would be just fine in my application given my power level and goals.

What did the AR5 transmission came in?

The AR5 is a five-speed transmission, with 5th being overdrive, that is found in 2005-and-up Chevrolet Colorado and GMC Canyon trucks, the 2006-and-up Pontiac Solstice and the 2007-up Saturn Skye.

How much torque can a NV3500 handle?

Reminder, NV3500 has 300ft-lbs input torque.

How strong is the AR5 transmission?

The AR-5 is a 5-speed manual transmission manufactured by Aisin. It is designed for longitudinal engine applications and can handle up to 260 ft·lbf (353 N·m) of torque based on existing applications.

How much horsepower can a supra transmission handle?

The Supra’s engine is only rated at 335 horsepower (although dyno testing has shown that figure is actually closer to 400 hp), but Papadakis found the engine to be far more stout than its factory rating would suggest. In fact, he believes the stock internals are capable of handling as much as 1,000 horses.

How much power can a NV3500 handle?

NV3500 MG5 has a input torque of 300ft-lbs. with my stock 350 pulling 212hp @4000 and 300ft-lbs @2800 I have had two fail and one of those went out leaving me with only 4th gear. I swapped it with a NV4500 MW3 2004 model. NV4500 can handle 475ft-lbs.

Is the T56 a good transmission?

“Once you get to about 700 horsepower, the T56 is done,” says Rodney Massengale, at RPM Transmissions, in Anderson, Indiana. “It’s a very good transmission, but just wasn’t designed for the kind of power that LS engines have been pumping out for the last few years.” And what about the Viper version of the T56?

Can a NV3500 handle a 350?

Can a NV3500 handle a 350? Registered. A NV3500 is good to about 300 ft lbs of torque, the vortec 350 makes around 325. You should be alright the factory rates the transmission at a lower rating, I would say they are good to about 375 and thats if it gets a good hook on some big meats.

How much HP can a stock NV4500 handle?

Registered. The NV4500 will not hold up to steady towing even if you limit it’s input to less than 300HP. If you limit application of power to everything but 4th it should hold up pretty well.

Can a Aisin AR5 be used as a LS transmission?

This AR5 to LS adapter allows you to bolt up an Aisin AR5 5-speed transmission from any Pontiac Solstice, Saturn Sky, Polaris Slingshot, or Chevrolet Colorado behind any gen III/IV LS engine. The kit includes:

Do you need a slave cylinder on an AR5 transmission?

With the Twin Disc clutch kit you do NOT need to add a Slave Cylinder, Full Length Clutch Hose, Pressure Plate Bolts, Clutch Fork, Clutch Hub, Fork Support, or 1JZ Flywheel. * If you select an Action or ACT Clutch Kit, it includes an AR5 Pilot Bearing, and a Release Bearing.

Is the AR5 transmission included in ACT clutch kit?

* If you select an Action or ACT Clutch Kit, it includes an AR5 Pilot Bearing, and a Release Bearing. *The transmission picture is just for illustration, obviously an AR5 transmission is NOT included with any of the parts listed here.

What kind of bell housing do I need for AR5 transmission?

* A 1JZ Bell Housing is needed for an AR5 transmission on any JZ engine (1jzgte, 2jzgte, 2jzge, 2jzgte vvti, etc…) * If you select a ClutchMasters Twin Disc Clutch Kit, it includes a custom internal Hydraulic Slave Cylinder, but does not include a Pilot Bearing.