How long is a Remington 700 receiver?

Remington Model 700

Is my Remington 700 short or long action?

Registered. On a Model 700, measure between the screw holes on the bottom of the rifle. Long action is 7 3/8″…. short action is 6 1/2″.

Is 308 long or short action Remington 700?

Shorter rounds like . 223/5.56mm, 308 Win & . 243 are short action.

How do you know if you have a long or short action rifle?

Short action rounds will have an overall length of less than 2.8” and the long action rounds will have a greater overall length that will not exceed 3.340”. This is a standard guideline, but will not always apply to magnum cartridges.

What’s the difference between a long action and short action rifle?

A short-action rifle simply uses a shorter length cartridge than a long-action rifle. Short action cartridges have an overall length of 2.3-2.8 inches while long action cartridges have an overall length of 2.8-3.34 inches. However, those numbers are only estimated as manufacturers sometimes classify them differently.

Is a .308 a short action rifle?

Short-Action: The 308 Winchester was the model for this action length. It was created by shortening the 30-06 case. COL is established at 2.8 inches. Rounds like 243 Win., 260 Rem., 6.5 Creedmoor, 7mm-08 Rem., 338 Federal, 358 Win.

Did Remington fix the 700 trigger?

Although Remington has fixed its Model 700 trigger problem, it is estimated that only 1 in 4 guns affected by the recall have been turned in. Nearly a million are still out there.

How old is the Remington Model 700 action?

For over 50 years, the Remington Model 700 action has been the frontrunner in rifle actions. Don’t miss out on your chance to pick up one of these actions while they are available because when they’re gone – they’re gone.

Are there any sponsors for the Remington 700?

This content and associated text is in no way sponsored by or affiliated with any company, organization, or real-world good that it may purport to portray. A few dims for remington 700 short action. Show more…

Can you tell if a Remington is a short or long action?

If you have a Remington 700, 721, 722 or 40x, you can determine whether your mount is a short or long action based upon what the gun is chambered in. If you have a Remington 788, you can determine whether your mount is a standard or long action based upon what the gun is chambered in.

Can you tell if a Remington 788 is a standard or long action?

If you have a Remington 788, you can determine whether your mount is a standard or long action based upon what the gun is chambered in. Standard (Std) / Long Action (LA) – All early guns. Flat back receivers were made in 3 different lengths until 2003. *To be sure, you must measure your center screw spread.