How do I find the IP address of my Cisco IP Phone?

You can view the IP address of Cisco phones within its menu settings.

1. Press the Menu or Setup (gear or folded paper icon) button.
2. Select Status.
3. Under Network Status or Network, the IP address will be displayed.

How do I find the IP address of my Cisco SPA 303?

You can find the IP address by pressing the “settings” button (the one looking like a sheet of paper right under the voicemail/letter button), and pressing 9.

How do I reset my Cisco SPA508G?

You can reset Cisco SPA302, SPA303, SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA512G, and SPA514G phones by following the steps below:

1. Press the Menu button.
2. Press Setting.
3. Navigate down to Factory Reset option.
4. Press select.

How do I reset my Cisco IP Phone SPA504G?

To reset a Cisco SPA504G back to default, press the Setup button. Once in the setup menu, navigate to menu #14 called Factory Default. Press select and then Ok to confirm your request to reset the phone. After your phone has been reset, all previous passwords on the phone are now gone.

How do I access my Cisco IP phone web interface?

How to access the web interface of Cisco 8861 or 7841 phone?

1. Press the Settings button.
2. Select Status.
3. Select Network Status.
4. Select either IPv4 Status or IPv6 Status, depending on which is used.
5. Note the IP Address.

How do I find the MAC address of a VOIP phone?

On the back of the phone: Look at the lower-right corner of the phone, you will find “MAC:” followed by a combination of letters and numbers. This is the MAC address.

How do I find the IP address of my IP phone?

Go to Settings and head towards Network & Internet and then go to Wi-Fi. Now, connect to your Wi-Fi network first and then click on the network’s name. You will see an Advanced section. Click on it and there you will find the IP address of your Android smartphone under Network details.

How do I access my Cisco IP Phone web interface?

How do you transfer a call on a Cisco IP phone?

Cisco IP Phone 7942G: How To Transfer Calls

1. During the call, press the Trnsfer soft key. The call is placed on hold.
2. Dial the number to which you want to transfer the call.
3. Wait for the call to be answered. Speak to the transfer recipient.
4. If the transfer fails, press the Resume soft key to return to the original call.

How to determine IP address on the Cisco spa504g IP phone?

This document explains how to determine the IP address of the Cisco SPA504G IP Phone. Once the IP address is determined, access the web-based utility for the phone will be granted. Step 1. Press the Paper button on the SPA504G to bring up the Setup menu. Step 2.

Why is spa504 unable to obtain network configuration?

SPA504 is unable to obtain network configuration. May be DHCP is unwilling to provide one for a reason. Even in ‘Initializing network’ state you should be able to enter phone’s menu so you can check it have IP address assigned or not. Check DHCP server logs as well. Try to configure network settings manually to confirm it’s DHCP issue.

How to provision Cisco spa phones for 3CX?

For a complete step by step guide to provisioning the Cisco SPA phones for use with 3CX see the general configuration guide of “ Provisioning of CISCO SPA Series .” Note: This guide was tested with the Cisco SPA firmware listed in the main provisioning guide. Other firmware versions might not have this functionality and will not be tested.