What does F08 mean on a Whirlpool washing machine?

open circuit
F08 indicates that the heater is an open circuit so check the heater for continuity with a meter.

What does E01 mean on a Whirlpool washing machine?

Fix Repair
This means there is a possible fault in the Drain pump, Pressure Switch, or the Electronic Control Board – CCU. Follow the instructions below as the error code may be coming up because a part is bent, clogged or needs to be rescued or cleaned out. Whirlpool Washer Error Code E01 – F09 – Fix Repair – Clear Error Code.

What does F08 error mean?

This is info i had come up with, F08 indicates that the heater is an open circuit. Check the heater wires for dislodged or burnt wires and check the heater for continuity with a meter. Check the link below for further info.

How do I fix e01 f08 on my Whirlpool washer?

Press the power button once then press the power button once more to turn the washer back on. This should remove the error display. If it still shows the error code after powering off the washer, unplug the washer. After one minute, plug the washer back in and start a cycle.

What does F8 E1 mean?

too long to fill
If F8 E1 or LF (too long to fill) appears in display, it means the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. This washer has sensors which detect the water supply, and requires both hoses to have water going to the water valve.

Why is my Whirlpool washing machine saying error F08?

Often error F08 appears as a result of a heater malfunction. You can check the heater very quickly.To do this, perform the following algorithm of actions (the sequence of steps described will help owners of machines with front-loading type, manipulations will be slightly different for vertical lines): disconnect the washing machine;

What does F8 E1 mean on a washing machine?

Error Code F8 E1, LF, or LO FL all indicate that no water is detected entering washer after 13 minutes. Depending on your model, you could see any one of these error codes. See your Owner’s Manual for further assistance. If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive.

What does 0 mean on a whirlpool hot water heater?

When the number 0 is displayed on the device (or a number very close to zero) – this means that it is possible to diagnose a short circuit in the heater, in which case you will also have to install a new heater. If the heater has passed the first test with a multimeter, just in case, check for breakdowns.

What does the number 1 mean on a whirlpool washing machine?

When the number 1 appears, this indicates a break in the part, and it will have to be replaced. When the number 0 is displayed on the device (or a number very close to zero) – this means that it is possible to diagnose a short circuit in the heater, in which case you will also have to install a new heater.