How much does it cost to get a rotor resurface?

As mentioned in our intro, if there is enough thickness of the rotors, then a mechanic may recommend resurfacing the part. If so, the costs, from what we researched, can range anywhere from $40 to $65 per rotor based on these factors at a mechanic and almost double this at a local dealership.

Is it worth it to resurface rotors?

Today, many brake rotors are manufactured to be thinner in order to save weight. Some manufacturers even recommend that rotors not be resurfaced at all. Instead, they recommend that, as long as the rotor is in good condition, the pads should be replaced. Once the rotors show signs of wear, out they go.

Is it illegal to resurface rotors?

If a rotor is worn down to the minimum thickness specification, or cannot be resurfaced without exceeding the dimension, it must be replaced. In some states, this is the law. Replacing one worn-out rotor usually means replacing both rotors on the vehicle, since they usually experience the same amount of wear.

How long do resurfaced rotors last?

Typically, brake rotors last between 30,000–70,000 miles. But you should bring your car to a licensed mechanic for regular brake inspections and pay attention to your vehicle to know when you might be due for brake service.

Does O Reilly’s resurface rotors?

Most O’Reilly Auto Parts locations can resurface your vehicle’s drums and rotors if they measure within specs and aren’t showing signs of extreme wear. Surface finish is crucial to proper vehicle braking and pad life and should always be part of a complete brake job.

Should I resurface my rotors or buy new ones?

Some vehicle manufacturers even require that you replace your rotors rather than resurface them. Otherwise, most industry experts suggest that you should replace them every 30-70K miles. In any case, if the rotors are beyond resurfacing, replacement is your only option.

How to resurface brake rotors for free on YouTube?

Resurfacing Brake Rotors for Free at Home! (How to) – YouTube Resurfacing Brake Rotors for Free at Home! (How to) If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

How are brake rotors turned in a car?

It is a common practice in the auto service industry to have the brake rotors “turned”. Many shops have a brake lathe which is used to spin the rotor while evenly cutting material off the surface of the rotor. This eliminates uneven spots on the rotor’s friction surface.

What is the minimum thickness of a brake rotor?

The lowest thickness measurement must not exceed the minimum thickness specification. Most rotors have a minimum thickness specification stamped somewhere on the hat portion of the rotor, this specification can also be found in the vehicle’s service manual. The brake rotor must not fall below the minimum thickness specification after resurfacing.

How often do rotors need to be replaced?

Even resurfaced rotors need to be replaced every 70,000 miles, doesn’t matter that they are in good working condition. Look for signs of uneven wear, excessive runout, and heavy pitting, spotting, grooving, hard spots, or cracking.