How do you make Polish horseshoes?

DIY Polish Horseshoes or Beersbee

1. Introduction: DIY Polish Horseshoes or Beersbee.
2. Step 1: Create the Platform for the Bottle to Sit On.
3. Step 2: Cut the 1″ PVC for the Beersbee Poles.
4. Step 3: Create the Base for the Beersbee Pole to Sit On.
5. Step 4: Finish Your Beersbee and Get Out and Play!

What size PVC do you need for Beersbee?

Purchase two 10 ft (3.0 m) lengths of 1.5–2 in (3.8–5.1 cm) PVC pipe. Find the PVC pipe in the plumbing section of a home improvement center. A diameter of 1.5–2 in (3.8–5.1 cm) is ideal so that the poles can be easily hammered into the ground as well as support a bottle or can.

What do I need for Beersbee?

Beersbee, frisknock, beer frisbee, polish horseshoes, or whatever you know it as, this game is awesome! You’ll just need a couple bottles, a frisbee, and a 2 pole set up. The game was a hit on our first weekend getaway of spring to West Michigan!

How far apart do you put Polish horseshoes?

The game is played by the players taking turns throwing a Frisbee at a glass bottle that rests on top of the stakes in the ground. The two stakes are placed anywhere between 20 to 40 ft (6.1 to 12.2 m) apart.

How tall should Polish Horseshoes be?

For a proper DIY version of polish horseshoes, you’ll need two poles about 6 feet tall. Some players use shorter poles, but we prefer at least 6 feet or higher. A taller pole makes for better throws and gives the defense more time to catch the bottle when it’s knocked off.

How far apart should Polish Horseshoes be?

between 20 to 40 ft
The game is played by the players taking turns throwing a Frisbee at a glass bottle that rests on top of the stakes in the ground. The two stakes are placed anywhere between 20 to 40 ft (6.1 to 12.2 m) apart. Players must hold a drink in one hand at all times, leaving only one hand free for throwing and catching.

What are the rules of Polish horseshoes?

The object of Polish Horseshoes is to knock the glass bottle off the stake either by hitting it directly or by hitting the stake. If the disc hits the stake and the bottle is knocked off, then one point is scored unless the bottle is caught before it hits the ground.

Why do they call it Polish horseshoes?

Polish horseshoes actually uses a Frisbee instead of horseshoes, and the “Polish” part of the name is derived from the fact that you need two poles to play the game–thus, the game is “pole-ish.” To play Polish horseshoes, you need a Frisbee, two empty beer bottles and two poles.

Why is it called Polish horseshoes?

What do you need to make Polish Horseshoes?

Supplies needed for 1 set consisting of 2 Polish Horseshoes poles: QTY: 2 – Short pieced of 3″ PVC Pipe, about 1″ each (optional but recommended) QTY: 2 – Optional for a spike base to push into the ground, you can get 2 1″ PVC Couplers

How to make horseshoes out of PVC poles?

Set up: 1 Using a mallet drive one dowel rod firmly into the ground, and slide one PVC pole over it. 2 Set up your second staked pole roughly 30ft from your first. (Some place them as much as 40ft. apart) 3 Place a glass bottle on top of each pole.

How do you make a horseshoe at Camp?

1. Measure & cut the following: 2. Create a frame by screwing two 3-foot and three 15-inch boards together. The shorter boards are on the inside of the longer boards. Repeat for other frame. 3. Drill (2) 1/2″ holes for the rope handle approximately 8 inches apart on one long side of each frame. 4. Cut (2) 1-foot sections for rope handles.

What’s the objective of the game of Polish Horseshoes?

The objective of the game is to throw a frisbee at a bottle that is resting on top of a pole. The other team tries to catch the frisbee and/or bottle to prevent you from scoring points. But there is a little more to it than that. This guide will teach you how to play polish horseshoes, including setup instructions, game rules and additional tips.