How do I reset my LG dryer not heating?
How do I reset my LG dryer not heating?
To fix it, we’re going to do a factory reset.
- Unplug the dryer or trip the circuit breaker supplying power to the dryer off.
- While the dryer is without power, press and hold the Start/Pause button for 5 sec.
- Restore power and try to run a cycle.
Why does my electric dryer have no heat?
Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element. If you gather your tools and follow this guide, you may be able to solve basic dryer heating problems on your own.
Where is the reset button on LG dryer?
This switch is typically located behind the POWER/PAUSE button under the display panel. When the POWER/PAUSE button is pressed, the start switch signals the control panel to start the dryer.
How dO I run a diagnostic on my LG dryer?
To run the Smart ThinQ feature:
- Open the Smart ThinQ App in your phone.
- Press the POWER to turn on the dryer.
- Place the mouthpiece of your phone very close to the POWER button.
- Press and hold the TEMP.
- Keep the phone in place until the tone transmission has finished.
Why is my LG dryer not starting?
If your dryer won’t start, a thermal fuse is the most common part to fail. You can find it on either the blower housing or the dryer’s heat source. The thermal fuse shuts off power to the dryer when the machine gets too hot. It should show continuity or a closed circuit.
How do I clear the error code on my LG dryer?
Reset the Control Panel
- Power the dryer OFF and unplug it from the electrical outlet (You can also trip the circuit breaker if that’s easier).
- Press and hold the START/PAUSE key for 5 seconds while the unit is without power.
- Turn the breaker back on, and power on the unit.
Why does my LG dryer take so long to dry?
Check for lint buildup. Check for lint buildup at the rear exhaust duct, the lint build up will cause a long time drying in the dryer. If you need the service of a professional technician, contact a local vent cleaning company to clean the vent. Inspect for damaged exhaust.
What does the error code on my LG dryer mean?
The , , , and error codes indicate that the dryer’s exhaust duct is clogged 75%, 80%, 90%, or 95% respectively. The hot, humid air from the dryer has to go somewhere, or else the moisture will stay in the drum and clothes. 2 or 4 four bars on the flowsense indicates that the exhaust system is severely restricted.
What should I do if my dryer is not heating?
Pinched gas line. Be sure that the gas line is not pinched or kinked when the dryer is pushed back into place. If you have performed the recommended solution in this article and the unit is still not heating, the unit will require a repair service.
How do I Turn Off wrinkle care on LG dryer?
The light on the button will turn off, and your clothes should dry properly now. Press and hold the wrinkle care button until OFF appears on the display (about 3 seconds). In some cases, energy saver could still be enabled for other cycles. Use the wrinkle care button whenever you see the energy saver button’s light on.