How do I know what size washer I need for my tap?

By far the easiest way to ensure you’re picking out the right washer size for your tap is to physically remove the old one and measure it. That way, when you decide to buy tap washers online, you’ll be able to sort products by the exact size you need with a single click.

What does it mean to reseat a tap?

Reseating a tap is basically grinding the seat to create a smooth flat surface to seal properly with the washer.

How do you regrind a tap?

Insert the grinder in the top of the tap, fit the thread of the bush in the screw thread and tighten it. While pushing down on the handle, twist the grinder against the tap seat. Twist clockwise so that the cutter tightens on the shaft.

Are there different types of tap washers?

To break it down, there are four basic tap type configurations: compression washer, ball, disk and cartridge. When you go to change your tap washers to stop a drip or a leak, these tap type differences will be crucial.

How long should tap washers last?

How Long Do Tap Washers Last? Ceramic tap washers can last years, but other types can last for as little as twelve months depending on how frequently they’re used. Rubber tends to degrade faster than nylon and vulcanised fibre, and hot water tap washers deform more quickly than their cold water counterparts.

How long should a tap washer last?

Do modern taps have washers?

Nowadays, the vast majority of modern bathroom taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off. Back in days of old, taps and shower fittings always used rubber washers to prevent dripping.

Are there different size tap washers?

Tap Washer Choices by Size Commonly used washer sizes for various indoor or outdoor taps include: 1-inch tap washer. 15mm tap washer. 16mm tap washer.

How to reseat bath tap and replace washers?

Remove the tap washer and unscrew the spindle from the body Remove the o-rings from the spindle and replace with new Lube up the thread of the spindle and replace back inside the body Reseat the seat as shown in the video. Remove all the brass filings by the methods shown in the video. Reinstall the spindles.

Is there a rating for how to reseat a tap?

Rating is available when the video has been rented. This feature is not available right now. Please try again later. How to reseat a tap shows how to use a tap reseating tool to grind the existing tap seat so that it is perfectly flush and free of any burrs or debris that can prevent the tap washer from sealing correctly.

Is it good to reseat a dripping washer?

The good thing about a reseating tool is that it can save you loads of money on buying a new tap especially after you’ve changed a washer in a tap and it is still dripping. A tap reseating tool smooths off the metal face onto which the washer connects.

What’s the best size for a tap seat?

Restore old tap seats into new condition. Easy push in installation. Suits hot and cold water. Suits indoor taps only. Includes body washers and size #8.5 o-rings. No. 8.5 o-rings are the most commonly used o-rings for indoor taps. Restore old tap seats into new condition.