How do I change the code on my Humax remote?

Point the Humax’s remote control at the Humax and press and hold both the OK and 0 buttons together for 5 seconds. Release the buttons when you see a message appear on the TV screen asking you to choose a code between 1 to 6. This message will also show you the currently set code number.

How do I reset my Humax remote control?

Humax Retail Remote

1. Press and hold the TV and RED coloured button (not the record button) at the same time for five seconds. The TV button can be found at the top of the remote control.
2. The ‘TV’ and ‘PVR’ buttons flash red three times.

Why is my Humax remote not working?

If you cannot control your Humax with it’s remote control you should check that the remote control is in PVR mode. If either the TV, DVD or AUDIO buttons light up you need to press the PVR button once to switch the remote control to PVR mode.

How do you change the remote code on Humax?

Switch on your TV set and the Humax product that you wish to change the remote code. 2. Make sure that the other Humax product that you do not wish to control is in Standby or powered OFF at the mains. 3. Point the remote control towards the remote control sensor of the target receiver.

How can I get my HDR remote to work?

3. Point the remote control towards the remote control sensor of the target receiver. 4. Press and hold the 0 and OK buttons simultaneously for 5 seconds until the PVR button on the remote stays red.

Why is my Panasonic remote not working on my Humax TV?

There seems to be a problem with Panasonic TVs when using the remote for the Humax FOXSAT-HDR, this is due to Panasonic TVs requiring a longer signal than that given out by the receiver’s remote.

Why do I need an IR extender for my Humax?

Also handy when you’re using the box remotely with an IR extender and can’t see whether it’s on or off. Saves you a few seconds turning on (or leaving on) the Humax with a 1 before the remote TV is powered on and on the HDMI input.