Is the Oldsmobile 307 a good engine?

The 307 is a good engine–reliable, decent gas mileage, easy to find parts for, and it comes with a 4-bbl Quadrajet!

How much horsepower does a 307 olds have?

From 1980 until 1990, Oldsmobile made a 307-cubic-inch, eight-cylinder engine that was capable of producing between 140 and 180 horsepower. The 307 went into nearly all ’80’s Oldmobiles, including the Delta 88s, Cutlass/442, 98s and Toronados.

Did Oldsmobile make a 307 engine?

Oldsmobile used the popular LV2, a 307-cubic-inch (5.0 L) engine, commonly known by the VIN code “Y”, from 1980-1990. It was used by every domestic GM automobile marque except for GMC and Saturn.

Did Pontiac make a 307?

It was used in cars from every GM brand (Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac). The 307 was also the last carbureted V8 that General Motors manufactured.

Is a 403 Olds a big block?

The Olds 403 was designed to be a big block in a small-block package. As a result, it has a bore of 4.351 inches (110.5 mm), giving it one of the widest bores of any factory small-block V8.

What is the difference between a 305 and 307?

the 305 uses a 3.736″ bore where as a 307 uses a 3.875 bore. a 305 is basically a destroked 350 and a 307 is basically a stroked 283. all the bolt on parts such as heads,intake, oil pan,water pump,cam,timing chain, etc, etc will interchange as it will with basically any other small block.

How many liters is a 307 engine?

The Chevy 307 V-8 has a displacement of 5.0 liters, or 307 cubic inches. The engine uses a bore and stroke of 3.875 inches by 3.25 inches.

How much does a 1986 Cutlass weight?

Features

Is the Pontiac 403 a good engine?

Overall, the Olds 403 is a good motor. It’s reliable when maintained, and has a surprising amount of torque for a stock smog small block.

When did the Olds 307 CID engine come out?

The 307 was built from 1980 through 1990, produced from 140hp to 180hp, and was installed in just about every car Olds built in that period at one time or another, including the Cutlass/442, Delta 88’s, 98’s and Toronados. It was also used in many Buick, Pontiac, Cadillac and Chevy models.

What kind of engine does an Oldsmobile Cutlass have?

Applications: 1 1976-1979 Cadillac Seville 2 1979 Cadillac Eldorado 3 1968-1977 Oldsmobile Cutlass 4 1968–1977 Oldsmobile Vista Cruiser 5 1973-1977 Oldsmobile 4-4-2 6 1968-1980 Oldsmobile Delta 88 7 1977-1980 Oldsmobile 98 8 1979-1981 Oldsmobile Toronado 9 1973-1979 Oldsmobile Omega

What are the dimensions of an Oldsmobile 307?

All 5A and 7A heads for the 307 have a lifter bank angle of 39 degrees and lifter diameter of 0.842 inches, and a pushrod length of 8.265 inches for hydraulic models. Engines with roller lifters have a 0.921 lifter diameter and a 7.718 pushrod length.

What kind of car does a Chevy 307 have?

The 307 went into nearly all ’80’s Oldmobiles, including the Delta 88s, Cutlass/442, 98s and Toronados. The 307 also went into other GM cars such as the Buick, Pontiac, Cadillac and Chevy. For the duration of the 307 engine’s production, it had a four-barrel carburetor.