Common questions

How do I access my Virgin Media Hub settings?

by Minnie

How do I access my Virgin Media Hub settings?

In normal router mode you access the Virgin Media router settings by: Typing http://192.168.0.1 into your web browser (or by clicking on the link to the left) Entering the router settings password in the box shown on screen – you’ll find that password on a sticker on the base of the router.

How do I reset my super hub 2?

Factory reset the Hub

  1. Make sure the Hub is switched on at the wall and at the back of the Hub.
  2. On the back of the Hub, press the pinhole reset button for 10 seconds.
  3. We recommend using a pin/pen for this as the hole is small.
  4. Allow the Hub a few minutes to clear its settings and reboot.

How do I change my hub settings?

How to open the Hub Manager

  1. Open a new web browser.
  2. Type 192.168.1.254 into the address bar.
  3. This will open the Hub Manager.
  4. If you want to make any changes to the hub settings, you’ll need the admin password. You’ll find it on the back of the Hub if you haven’t updated it.

Does Virgin superhub have WPS button?

If you have an older Superhub the WPS button is that big blue glowing Virgin Media logo on the side. Press the lit-up blue button on your Super Hub for two seconds – This will prepare the Super Hub to connect to compatible WPS devices, such as your computer, Smartphone or the Push2Sync USB adapter.

How do I access my Hub 3 settings?

How to access advanced settings. *Enter If you have enabled Modem Mode on the Hub you will need to use 192.168. 100.1 instead. When prompted, enter the settings password shown on the bottom of the Hub.

How do I connect my virgin Hub 3 to modem mode?

How to enable modem mode on the Hub 3 or Hub 4

  1. Enter 192.168.0.1 into the address bar of your browser.
  2. The password is printed on the bottom of the Hub.
  3. Select Modem Mode on the left hand side of the screen.
  4. Select the option next to Enable Modem Mode.
  5. Select Apply changes.

How do I clear the cache on my virgin router?

Go to History in the Menu Bar and select Clear Recent History… Make a selection in Time range to clear. In the History section, check the boxes next to Cache and Cookies. Select Clear Now.

How do you reboot Virgin hub?

Reboot the Hub

  1. Make sure the Hub’s power supply is firmly connected to the wall socket and back of the Hub.
  2. Turn the power switch off and on again.
  3. It can take 5 to 10 minutes for the Hub to fully reboot.
  4. You’ll know it’s ready when the white power light at the front of the Hub is on.

How do I change from 2.4 GHz to 5GHz virgin?

Click Advanced settings, then Wireless and then Wireless signal. Tick the box next to Manual which will enable the drop-down menu and choose a channel. There are different options for the 2.4GHz and 5GHz channel.

How do I use the WPS button on Virgin Media?

How do I use a PIN to add a WPS client to my Virgin Media Hub?

  1. Access the settings page by entering the web address shown on the Hub sticker.
  2. Click Advanced settings from the menu on the left.
  3. Click on Wireless then WPS.
  4. Tick the Enable option next to WPS PIN.
  5. Under the Add WPS client tick the option next to PIN.

How do I turn off the WPS flash button on Virgin Media?

Just kill the WPS function in the Hub Settings. That should stop it.

How to set up Virgin Media super hub?

Click here for more setup guides. Open a web browser and type “192.168.0.1” into the URL bar then press [Return]/ [Enter] to load the webpage. When the page loads, login using the router’s admin credentials. After logging into your router, click the “Wireless Network Settings” button.

How to turn on Modem mode on Virgin Media Hub?

1. Take a look at the sticker on the back of the Super Hub and locate the web address under Super Hub Settings 2. Open a Web browser (e.g. Internet Explorer) and enter the address http://192.168.0.1 Note : If you have enabled Modem Mode on your Super Hub (the logo on the front will be glowing purple)…

How can I change the password on my Virgin Media Hub?

When prompted, enter the settings password shown on the bottom of the Hub. Once you’ve accessed the page there are a variety of settings you can change. 1. Select Advanced Settings on the left-hand side 2. Select Wireless 3. Select Security 4. You’ll then be able to change your WiFi network name and password 5.

How to set up guest network in super hub 2AC?

On top of standard WLAN SSID you can set up two guest networks per wireless channel (2.4GHz and 5GHz). Just go to advanced settings on the Super Hub 2ac Network Manager and click on the network you wish to amend: Now visitors have access to your network, and the internet, for as long as you need them to.