How do I restore an old vintage radio?

Follow these general steps to restore your radio:

1. Do not power on your radio.
2. Find a service manual.
3. Replace all electrolytic and paper capacitors with new ones of similar value and same or better voltage rating.
4. Examine closely and replace anything that looks damaged, such as burned up resistors.

How much does it cost to repair radio?

Repair rates run from $185 to $300, depending on the make and model. That may seem high, but new factory replacements can run almost twice that price.

What did valves do in old radios?

Tuned radio frequency sets These used several valves (tubes) to provide RF amplification, detection, and audio amplification. Early TRF sets only operated headphones, but by the mid-1920s it was more common to use additional amplification to power a loudspeaker, despite the expense.

Do valve radios still work?

A valve radio will never be as reliable as a transistor set, and short of ripping out the chassis and replacing it with a transistor circuit, we aren’t going to make it that reliable. However, some designs of valve set are more unreliable than others, and the main factor seems to be heat.

How do I fix static on my car radio?

Fixing AM/FM Car Radio Static

1. Determine whether the problem is external.
2. Check the car radio ground connection.
3. Unplug the radio antenna and check if the sound is still there.
4. Check if moving the antenna wire removes static.
5. Check if moving other wires removes the static.
6. Install a noise filter or replace the head unit.

How much does it cost to fix a car sound system?

Typically, if you wish to replace your sound system or install car speakers, you should only pay for what you need. A good quality sound system might cost from $60-160 or even more. It all depends on what you want.

How do you refinish old radio cabinets?

Application Tips:

1. Spray according to the directions on the can.
2. Stain, seal any open grain, then spray on lacquer.
3. If you are using high-build lacquer, skip the seal step.
4. Apply many light coats versus a few heavy ones.
5. Lightly sand between coats with 600 grit paper.

Where can I get an antique radio repaired?

For a detailed list of our antique radio repair procedures please visit our antique radio repair page by using the services link to see what we can do for you. One of our radio-movie venture includes “The Lost City” staring Andy Garcia, Dustin Hoffman and Bill Murray.

Are there any British made transistor radios that can be repaired?

The only exception to this rule is for British made portable transistor radios such as Hacker and Roberts. We are also quite happy to repair the “revival” range of Roberts portables currently on sale. No toasters, TV’s or microwaves please!

How long does it take London sound to repair a radio?

As with all repairs carried out here, London Sound provides free estimates for the service, overhaul and repairs on even the oldest of valve radios and radiograms, and also provides a full 12 month guarantee, in writing. Please note the guarantee covers the whole of the radio or radiogram overhauled, not just the actual repairs.

How long has fylp restorations been doing radio repair?

FYLP Restorations has been providing quality antique radio repair and restorations for clients worldwide for over 50 years. Our expertise coupled with modern technology allows us to do what most repair facilities cannot.