How much does it cost to repair a grandmother clock?

The cost of servicing a grandfather clock can vary between $100 and $2,500, depending on what services are necessary. Normal servicing is not too costly while repairing and replacing parts can quickly add up. Major factors that impact the cost include: The type of clock and internal mechanisms.

What is a Metamec clock?

The first Metamec model was a mains-powered mantle clock numbered “701” (approx. 1947). They became a manufacturer of the now iconic large ‘Sunburst’ chrome, teak and brass clocks. Metamec was the largest clock manufacturer in the UK at the time.

How much does cuckoo clock repair cost?

A cuckoo clock, on average, can cost $200 to $400 to repair. A clock with animation will usually cost 30 to 50 percent more than one with no animations. Also, the more weights that the clock has, the higher the price can be.

How do you fix an over wound grandfather clock?

When you do wind your clock, just make sure you have a tight fitting key and that it is inserted all the way. Turn the key slowly and just a half turn at a time. Wind it up until it stops. Do not try to force it to wind any further.

How do you set a grandmother clock?

How to Adjust a Colonial Grandmother Clock

1. Stop the pendulum with your hand. The pendulum stops easily, so you do not need to grab it.
2. Push the minute hand on the clock gently clockwise a quarter turn or 15 minutes or less.
3. Push the pendulum gently to one side and release it to start the clock again.

What is considered a grandmother clock?

Moving down the scale, the next question to ask is “what is considered a grandmother clock”? Just like the grandfather clock, grandmother clocks are free-standing clocks with long cases and pendulums to keep time, but they are also smaller than grandfather clocks.

How much does it cost to have a grandfather clock moved?

Typically, it will cost between $300-$1,300 or more to ship your grandfather clock using peer-to-peer shipping services, depending on the size, age, and value of your clock and whether you need any additional services, such as packing or loading.

Is the Metamec clock a cheap throw away?

So a strip down first and as expected it is cheap. Thin metal both on the case and the frame of the mech. Still a lovely little thing when opened but dirty. Close inspection showed little wear to the pinions but very gummed up. Full strip down and ultrasonic clean to start with. Then a careful thorough clean and inspection.

How to clean a Metamec clock corner watch?

Full strip down and ultrasonic clean to start with. Then a careful thorough clean and inspection. The pivot connected to the hair spring wasn’t bad at all. The cups that it sits in was gunked up so carefully dug the gunk out cleaned and the pivot ends polished.

Which is better Westminster Smith or Metamec clock?

Fairly snug in the pivot holes but enough space to allow a little movement. The hair spring gave a little bit of a problem but soon resolved it. The mainspring was fun. Not as powerful as the Westminster Smith but still enough to give a nasty nip.

Where can I find a clock repair business?

Can’t find the business? Adding a business to Yelp is always free. Got search feedback? Help us improve. What are some popular services for Clock Repair?