How do I control my home theater with my Samsung remote?

Control your soundbar using your Samsung TV remote

1. Use the TV remote to navigate to Settings, select Sound, and then select Sound Output on your Samsung TV.
2. Select your Samsung soundbar, and then select Close. Now you can use your TV remote to adjust volume and mute the soundbar.

How do I use my Samsung DVD remote control?

Samsung Remote Program guide for DVD Player

1. 1 – Turn your DVD player off.
2. 2 – Press the Mode button on your remote to switch the remote to DVD mode.
3. 3 – Press the Set button on the remote control.
4. 4 – Enter the three digit DVD player code listed in your TV’s user manual.
5. 5 – Press the Power button on the remote control.

How do I use my Samsung universal remote?

Follow the below steps to use the Universal Remote option:

1. 1 Using your remote, select Home.
2. 2 Scroll left and select Source.
3. 3 Scroll up and select Universal Remote.
4. 4 Select New Device.
5. 5 Select the type of device you are trying to connect your remote to e.g. Blu-ray player.
6. 6 Select the brand of your device.

What are the buttons on the Samsung remote?

1 Directional button (up, down, left, right) Use to navigate the menu or move the focus to highlight items on the Home Screen. 2 Select Selects or runs a focused item. When pressed while you are watching a broadcast program, detailed program information appears. (Return) Press to return to the previous menu.

Where is the Set button on Samsung remote?

Use a paper clip, tooth pick, or any other item with a thin tip to press down on the tiny indented “Set” button at the bottom of the remote control.

Why wont my Samsung remote Connect?

1 Reset the remote. Remove the batteries and then press Power for 8 seconds to reset the remote. Then reinsert the batteries and try to use the remote again. Check out the user manual if you need help accessing the battery compartment.

Can I program my Samsung remote?

If your Samsung remote control has a “Mode” or “Set” button, it is a universal remote control. You can program your remote control to operate your DVD player, cable box, satellite receiver and VCR.

Where is menu button on Samsung Smart TV remote?

Access the Settings menu Press the Home button. From the Home screen, use the directional pad on your TV remote to navigate to and select Settings. From here, select and adjust your desired options.

Why does my Samsung remote say not available?

If your Samsung remote keeps saying that it is not available, turn your television set off and allow it to completely drain of power. Once this is completed, turn the TV back on and simultaneously hold down the ‘Return’ and ‘Play/Pause’ button on the remote control as the TV starts back up.

Where is the Smart Remote on a Samsung TV?

Point the Smart Remote at the remote control sensor on the TV. On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How big is the manual for Samsung remote control 3way?

Samsung Remote Control 3WAY COMBINATIONTELEVISION Operation & user’s manual (129 pages, 32.44 Mb)

How do I program my Samsung remote control?

Program your Samsung remote control using the Mode button or the appropriate buttons on the device. Some universal Samsung remotes have buttons for cable boxes, DVD players and other electronics, while others have a Mode button with a menu for selecting the correct device. Turn off device you want to control.

What should I know before installing a Samsung TV?

• Be sure to contact an authorised Samsung service centre for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do so may lead to serious damage to your TV.