How much HP can a 4L60E handle?
How much HP can a 4L60E handle?
So, to keep things cooler they run a deep pan with a filter extension. The heavy-gauge cast-aluminum pan allows for an additional two quarts of transmission fluid, which enhances cooling under extreme conditions. 22. See, that’s all it takes to build a 4L60E trans that’s rated to handle over 1,000 horsepower.
How can I make my 4L60E stronger?
Now, let’s dive in:
- Lay out the important parts on an assembly bench.
- Rebuild with an improved, thicker sun shell.
- Use five-pinion front/rear planetary.
- Use a larger clutch with an input drum reinforcement sleeve.
- Stamped Steel forward clutch apply pistons.
- Use more clutches and larger gear band servo pistons.
Who makes the best 4L60E transmission?
Finish Line Transmission (FLT), Performabuilt and RPM Transmission are probably the top rated 4L60E trans builders.
Can I rebuild my 4L60E myself?
New adaptations are being developed all the time, engineered to make your 700-R4, 4L60, 4L60E, 4L65E, and 4L75E boxes better. Unless you are a seasoned transmission builder with a lot of experience with the 4L60E series transmissions, it is suggested you never execute transmission rebuilding yourself.
Can I swap a 4L60E for a 4L80E?
Upgrading from the 4L60E to the 4L80E is akin to going from a Dana 44 axle to a Dana 60–you’ll add some weight, but also add durability. According to GM Powertrain information, the 4L60E has a maximum engine torque rating of 360 lb-ft and a maximum gearbox torque rating of 610 lb-ft.
How much does it cost to rebuild 4L60E?
Compare with similar items
| This item 4L60E Transmission Rebuild Kit Heavy Duty Master Kit with 3-4 Power-pack | 4L60E 4L65E 4L60-E Master Overhaul Rebuild Kit With All Alto HEG Heavy Duty Frictions | |
|---|---|---|
| Price | $28500 | $255.00$255.00 |
| Sold By | World Wide Parts Outlet | World Wide Parts Outlet |
Can I put a 4L80E in place of a 4L60E?
What transmission is better 4L60E or 4L80E?
Without a doubt the 4L80E is the more powerful of the two transmissions. Vehicles with powerful engines, such as big trucks for towing or high speed cars for racing, require a 4L80E rather than a 4L60E as the power of the engine is likely to break smaller, less powerful transmissions.
Can a 4L60E handle 450 horsepower?
A well built 4l60e can handle some serious power. We have cars running 500-600 and 700 rwhp as the power increases of course the odds of failure do increase but we have had very good results. Generally a stock rebuild is not adequate for much more than general bolt ons however.
Are 4L60E reliable?
In short, the 4L60E is an excellent transmission that continues to be improved. It’s one of the most popular automatic transmissions in America, and there are still millions of them in use. Gearstar builds high performance transmissions that are handbuilt in our shop.
What does a shift kit do for a 4L60E?
In short, an automatic transmission shift kit modifies the transmission’s shift timing in order to dramatically increase shift firmness and durability of the transmission components.
How many miles can you get out of a 4L60E?
Re: what are the max miles on 4l60e transmission before fail Reverse kinda was finicky, every now and than it would slip but had a good life. I honestly think around 250-300k it should be rebuilt if its original.
Are all 4L60E transmissions the same?
4L60E transmission bellhousings are not the same. One of the main differences in the earlier and later 4L60E transmissions is the bellhousing area. In the earlier versions, the case was cast as on piece of aluminum. In the later versions of it had a removable bellhousing.
What does the E stand for in 4L60E?
4L60E Identification. The 4L60E transmission has been in production for over twenty years, even longer if you consider the fact that it came from the 4L60 (700R4). The 4L60 got the E at the end whenever control of the transmission was switched to the engine computer. The E stands for “electronic” or electronic shift.
What is the difference between 4L60E transmission?
The biggest difference between the 4L60 and 4L60E is how they are controlled. The 4L60E is controlled by a computer, while the 4L60 is controlled by a TV cable. Since one is computer controlled, and the other is not, they don’t play nice with one another.
What is the length of a 4L60E?
The 4L60E has a weight of 150 lbs without fluid and the length of 23.5″, while the 4L80e have the weight of 236 lbs and the length of 26.4″. Just with these number, you can probably calculate that there is a big difference in size and weight between these transmissions.