What is tnemec paint used for?

A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment.

Is urethane paint good for metal?

Urethane coatings for metals is a two-part coating solution best used for exterior equipments. Because of its tough qualities, urethane is also used in corrosion management as a first line of defense against corrosive agents.

Can you coat steel with polyurethane?

Polyurethane is valued for being a hard and non-toxic metallic finish that is also relatively low in terms of volatile organic compound (VOC) release. It is commonly employed for protection of structural steel and is used in industrial settings for railings, architectural coating, and for equipment.

What is urethane coating?

A polyurethane coating is a polyurethane layer applied to the surface of a substrate for the purpose of protecting it. These coatings help protect substrates from various types of defects such as corrosion, weathering, abrasion and other deteriorating processes.

How do you use Tnemec paint?

Using a power mixer, separately mix Parts A and B. Add Part A to Part B under agitation, stir until thoroughly mixed. Both components should be above 50˚F (10˚C) prior to mixing. For application to surfaces between 35˚F to 50˚F (2˚C to 10˚C), allow mixed material to stand thirty (30) minutes and restir before using.

What is in red oxide primer?

Red oxide primer is formulated for ferrous metals containing iron elements. Unlike nonferrous metals, ferrous metals have magnetic properties. This primer variety isn’t suitable for bituminous or asphalt surfaces as well. How to Prepare the Surface Before Applying Red Oxide Metal Primer?

Can I put polyurethane over painted metal?

Can you polyurethane over painted metal? Applying one or two coats of polyurethane to a painted surface is a good way to protect the paint. Oil-based polyurethane levels out to a smoother finish, although it takes several hours longer to dry.

What is epoxy urethane primer?

410-48248 Epoxy Urethane Primer is a two component adhesion promoting epoxy urethane primer designed to be used over bare metal surfaces under polyester spray or hand applied body fillers and 2K primers, to protect against corrosion. It should be used whenever optimum corrosion protection is required.

Can you use polyurethane over paint on metal?

Clear polyurethane will not adhere to bare metal. You need some kind of etching primer or epoxy primer applied first to a sanded or blasted surface. Krylon COVERMAXX Spray Paint – Great Application Spray. …

Is urethane waterproof?

No, polyurethane does not make hardwood waterproof, but it does make wood water resistant. Polyurethane gives hardwood its protection. It repels water and prevents water absorption, but it never fully blocks it so it will never make it 100% waterproof. Polyurethane also protects wood for scratches and discoloration.

Is epoxy stronger than urethane?

Overall, epoxy coatings offer a harder, more impact-resistant floor compared to urethane. Its bond with the concrete substrate, together with the thickness it is able to sustain, makes it hard to beat in durability. Epoxy has its limitations, too. This coating is sensitive to UV light.

What’s the difference between painting and powder coating?

The number one difference between powder coating and your traditional liquid paint is that powder coating doesn’t need a solvent to keep the filler and binder parts in liquid form. Powder coatings create a thicker coat without sagging or running like conventional liquid coating does.

What kind of paint does Tnemec company make?

Innovation in Every Coat™. For nearly a century, Tnemec Company, Inc. has been a leading manufacturer of coatings and coating systems for exterior and interior environments.

Are there any special additives for Tnemec coatings?

Special additive for most Tnemec urethane coatings affording low temperature application and accelerated cure for rapid handling and recoat situations. Special additive for Series 740/750 UVX affording low temperature application and faster moisture resistance.

How to contact the Tnemec Company, Inc.?

What’s more, Tnemec’s extensive product line is backed by outstanding technical support provided by highly knowledgeable coating consultants. Expert assistance with specifications, coating selection, performance data and application parameters is available by simply clicking here or calling 1-800-TNEMEC1 (1-800-863-6321).

What can Tnemec epoxy be used for in concrete?

Contact your Tnemec representative for other systems and additional information on potential uses. A high-solids, lower VOC version of Tnemec’s proven polyamide epoxy technology for steel and concrete substrates. Fast-cure properties are ideal for shop and low temperature application.