What size injectors do I need for 400 hp?
What size injectors do I need for 400 hp?
On a 400 hp engine you will nedd four 500 cc injectors.
How much HP does 1000cc injectors add?
The 1000cc Injectors can support 650+whp.
How much HP do bigger injectors add?
Larger throttle body and injectors A larger high-performance throttle body will deliver more horsepower. Depending on what type of engine you have, you can gain as much as 10-20 more horsepower and comparable torque. There is a catch, however. Go too large and you can lose power.
How much HP will 60lb injectors support?
60′ will support 600+ rwhp with pump fuel…not the case with e85 at those levels!
How much HP can 750cc injectors make?
Regardless of what some calculators may say, healthy 750cc injectors will easily and safely support over 800BHP all day long on gasoline.
How much HP can LSA injectors handle?
The stock injectors are good to about 600 hp at the wheels. The stock dual fuel pumps are good to about 650 hp at the wheels.
How much HP gain from fuel injectors?
However, when the discussion moves into the topic of whether or not fuel injection increases horsepower, we’ve got you covered. We have done some research on fuel injection versus carburetor and found an answer. The technical answer is yes; fuel injectors can add 10 extra horsepower at peak.
What is the easiest way to increase horsepower?
Here are some popular methods to increase your engine’s horsepower.
- Cold Air Intake. Upgrading your vehicle’s intake is one of the easier methods for unlocking some extra horsepower.
- Performance Exhaust.
- Software.
- Forced Induction.
- Performance Engine Build.
- Engine Conversion.
How much HP can 42lb injectors handle?
Registered. 42lb’ers should be able to support close to 100hp a piece at 100% duty cycle, Your injectors must be dirty or something if they are maxing out at your power level.
How much HP will 42lb injectors support?
What injectors do I need?
of fuel per injector at an 80% (0.8) duty cycle….Flow Rate Definition, Calculating Horsepower Range.
| Injector Flow Rate | Naturally Aspirated Engine | Engine w/ Power Adder |
|---|---|---|
| 19 lbs./hr. | 225-290 hp | 185-240 hp |
| 24 lbs./hr. | 280-360 hp | 240-300 hp |
| 30 lbs./hr. | 350-450 hp | 300-375 hp |
| 36 lbs./hr. | 425-540 hp | 350-450 hp |
How much horsepower does a Nissan CA18DET have?
CA18DET-R: 185 PS (136 KW; 182 HP) at 6,400 rpm of horsepower and 240 Nm (24.5 kg·m; 177.1 ft·lb) at 4,000 rpm of torque. The Nissan CA18DET motor has a cast-iron cylinder block. The cylinder block, a monoblock special casting structure, employs a five-bearing-support system.
What is the compression ratio of a CA18DE engine?
The CA18DE engine cylinder bore is 83.0 mm (3.268 in) and the piston stroke is 83.6 mm (3.291 in), compression ratio rating is 10.0:1. Each piston is fitted with two compression rings and a single oil ring. The cylinder block height is 204.8 mm (8.06 in). ATTENTION!
What kind of engine does a Nissan ca1d8et have?
The Nissan CA1D8ET engine has DOHC (dual overhead camshaft) design with four valves per cylinder, cast-iron block, and an aluminum cylinder head. The engine is equipped with Multiport Fuel Injection system and single Garrett T25 turbocharger. The engine was available in two versions: with intercooler and without it.
Is the bottom end of a Nissan CA18DET forged?
This is anecdotal but a friend of mine ran his CA18DET with a forged bottom end at 420 bhp (flywheel) for several years with no issues. The stock CA18DET intake and exhaust are very restrictive, this is for reduced noise and for emissions, if you want to start tuning then these are the first things to upgrade.