How do I access my speedtouch modem?

Configuring A Speedtouch Modem

1. Open a web browser (such as Internet Explorer, or Mozilla Firefox).
2. Type 192.168.
3. Click on the Speedtouch link on the left sidebar menu.
4. Click on Set Up to open the Set-up Wizard.
5. Under Select a Service, select Bridge and click Next.
6. In the drop down box, set your VPI/VCI settings to 0.35.

What is the username and password for my modem?

The default login username and password both are admin. If you or someone had changed them but you forget them now, the only way to access the modem/router is to reset the router to factory default settings.

How do I find my modem admin password?

To locate the default username and password for the router, look in its manual. If you’ve lost the manual, you can often find it by searching for your router’s model number and “manual” on Google. Or just search for your router’s model and “default password.”

How do I change my WiFi password with SpeedTouch?

Changing WiFi Password on SpeedTouch ST585

1. Open web browser and type http://192.168.1.254 or http://dsldevice.lan in to the address bar.
2. Enter the username Administrator and the DSL password.
3. From the Home Page, select the link Wireless towards the bottom of the page.

What is modem administrator password?

Type http://home (or 192.168. 2.1) in the address bar and then press Enter on your keyboard to access your modem’s settings. Enter the administrator password. Unless you have changed it, the default password is “admin”.

How to use SpeedTouch on a router?

SpeedTouch 516 Routed Setup Routed mode should be used when you want to connect a device directly to the modem, or you are unable to configure your own stand alone router. Navigate to the modem’s web interface. (http://192.168.1.254) Click on the SpeedTouch button. (Left hand side of page.) Click the Set Up link. (Found…

How do I reboot my modem with SpeedTouch?

Connect your modem to electricity, wait for the PWR light to turn green. Then press AND hold the reset button (in the hole at the back of the SpeedTouch) down for 15 seconds, then release / take your hand off the button. Modem will reboot, red light, then green light when ready.

How to remove username and password from SpeedTouch?

Some of the Telstra ones have admin and admin. If that doesn’t work download the latest firmware and use the bootp upgrade method which will bypass the need for username and password and will delete any user or ISP files, so you get true factory default setup. I detailed it here Thank you for the quick reply.

What kind of modem does SpeedTouch asymmetric ADSL use?

With the award-winning SpeedTouch™ Asymmetric Digital Subscriber Line (ADSL) modem surfing the Internet will become a whole new experience. In this Setup and User’s Guide This Setup and User’s Guide will assist you in getting acquainted with the Speed- Touch™USB/330 ADSL USB modem and in getting connected quickly to the Internet.