How much does a 50 lb bag of polymeric sand cover?

One bag of 50 lbs (22.7 kg) of this product will cover between 20 to 30 square feet (1.86 to 2.8 m2) if the joints are about 1″ to 2″ (2.54 to 5.08 cm) wide and the stones are about 2″ to 2-1/2″ (5.08 cm to 6.35 cm) thick.

How much does paver sand cost?

The recommended depth of sand for laying pavers is 1 inch. As one inch is 1/12 of a foot, divide the surface area, in square feet, by 12 to find the cubic feet of sand required. For example, a 60-square-foot patio requires 5 cubic feet of sand because 60/12 = 5.

How many square feet is 40 pounds of polymeric sand?

Sakrete Paver Set Joint Sand This 40-pound bucket of sand provides up to 45 square feet of coverage for joints ¼-inch wide on 2-inch thick pavers. This formula also works for joints as wide as 1½ inches, which is rare for a polymeric sand.

How big a gap can polymeric sand fill?

Polymeric sand works best to fill gaps between 1/4 inch and 1.5 inches wide. Wider joints will require more time to harden.

What kind of sand do you use for patio pavers?

In most patio and driveway installations, you’ll want to add polymeric sand to fill in the joints between the pavers. Adding polymeric sand locks them together, so they don’t move and also prevents weeds and plants from growing in the joints. A 50lb bag of polymeric sand typically covers 25-50 square feet.

How much does it cost to seal a paver patio?

The average cost to seal pavers is $0.80 to $2.50 per square foot, which includes cleaning, installing polymeric sand, and applying a wet-look sealer. Prices to seal a paver patio depends on the brick type, joint width, porosity of the paver, the job’s size, and the quality of sealer.

How much does a paver block cost per square foot?

Patio paver blocks cost $2 to $8 per square foot on average. Block paving bricks are typically made from concrete, which looks like several bricks in one unit. Blocks save on installation time, and the cost is cheaper than stamped concrete. Interlocking paver blocks cost $2 to $8 per square foot on average and typically come pre-sealed.

How to calculate the amount of sand and gravel for a paver patio?

Estimating Sand and Gravel for Paver Patio. To estimate the amount of gravel and sand required you must find the ft 2 of your patio and then find the volume necessary for a 4″ layer of gravel and a 1″ layer of sand. Use our paver base calculator to estimate the amount of gravel and sand you need for the base of your paver project.