How wide is 1×6 tongue and groove pine boards?

Can tongue and groove be used outside?

Tongue and groove decking should be used for covered porches and patios only. Do not allow standing water to collect under the deck. Ensure that the ground is adequately sloped under the deck to eliminate standing water under the structure.

How wide is tongue and groove?

A 1″ NOMINAL is usually 11/16ths inch thick. A 6″ NOMINAL T&G pattern is usually 5 3/8 – 5 1/2″ wide including the overlap which results in 4 7/8 – 5 1/8 inches of exposed face depending on tongue depth.

How much does tongue and groove pine cost?

So, we know the tongue and groove ceiling looks awesome, but the big question is it affordable? According to the material you choose it can run anywhere from $2.00-$3.50 per square foot. It comes in many different wood species like knotty pine, clear pine, cedar, and redwood.

Can you use tongue and groove pine for exterior siding?

Nothing adds elegance like installing tongue and groove pine siding. The construction gives this type of siding its distinctive look and durability. It can be used both inside and outside, and it can be painted, stained, or clear coated for a beautiful natural-looking finish.

How expensive is tongue and groove?

Is a tongue and groove roof good?

T&G roof decking provides roofs with several advantages that make it ideal for pre-engineered buildings. T&G is the Romtec standard because of its durability, its variety materials, and its attractive appearance. These benefits ensure that every standard Romtec building is the best in terms of price and quality.

Do you need tongue and groove for roof?

Tongue & Groove Boards The main reason to use tongue-and-groove boards these days is appearance – from beneath the roof. Say what you want about them but OSB and plywood do not offer a very attractive “finished” look. T&G roof decking, however, looks classy and rich.

Can you use Douglas fir tongue and groove decking?

Our Kiln Dried 2×6 Douglas Fir Tongue and Groove Decking is ready for installation once received on your jobsite. However, wood will shrink and swell with any changes in moisture content and weather.

How big is tongue and groove pine board?

Nails, screws or construction adhesives can be used with Tongue and Groove pine boards. Used for centuries in elegant and rustic settings, pattern stock paneling will remain gorgeous for years to come. Common: 1 in. x 6 in. x 12 ft.; actual: 0.75 in. x 5.5 in. x 144 in.

When to put tongue and groove on deck?

If the climate in a particular region causes wood to maintain 8% to 13% moisture content annually, then the most ideal tongue and groove would be installed at a moisture content within that range, and the material would be stored, stickered and protected for a week to ten days prior to application.

How much does a tongue and groove board cost?

Save up to $100♢ on your qualifying purchase. Curbside pickup available. Decorate your interior or exterior space with old-fashioned natural pine Tongue and Groove boards. Create a country, cottage or rustic cabin look and feel. Every Eastern White Pine board meets the highest grading standards for strength and appearance.