How do I change my CPlane back to original?

Return to the original CPlane by clicking on the Previous CPlane icon. Next use the Set CPlane by 3 points icon to create an orientation relative to a diagonal on the box.

How do you flip a CPlane?

Pick an x-axis direction or press Enter. The Flip option reverses the direction. The IgnoreTrims option uses entire untrimmed underlying surface. The Through option moves the construction plane origin to a selected point.

How do you undo a CPlane in rhino?

To reset the CPlane, use CPlane (World) and select the worldview you would like the CPlane to lie in.

How do you align surfaces in Rhino?

Steps

1. Select the objects to align, and press Enter.
2. Specify an alignment option.
3. At the prompt for an alignment point, pick a location, or press Enter to align based on the overall bounding box of all selected objects.

Can you move the origin in Rhino?

Move Model to Origin: 1> Select Move tool. 2> When prompted select your model and hit return or RMB. 3> When prompted select any point on your model and hit return or RMB. 4> When prompted type 0 in the command line and hit return or RMB.

How to set the construction plane in Rhino?

The 3Point option sets the construction plane in the active viewport by specifying points to establish the x, y, and z directions. Pick a new origin, or press Enter. Pick the x axis. Pick the y axis. Sets the construction plane perpendicular to the current construction plane. Sets the construction plane z axis direction.

How to reset cplane Rhino in Windows McNeel?

MPlane command attaches mobile construction plane to any object. When you move the object, the construction plane follows the object. You may have dozens of mobile construction planes in the same Rhino model. If you’re moving cplanes in the default 4 views, this macro resets cplane in all of them then returns the viewport to perspective maximized.

How do you change the direction of a curve in Rhino?

The direction of the curve affects the direction of the axes. If the construction plane does not go the direction you want, flip the direction of the curve with the Flip or Dir commands. Type subcrv to select part of a curve as input. The Elevation option changes the elevation (z direction) of the construction plane. Pick a new elevation.

How do you rotate a construction plane in cplane?

The Y-axis will be 90 degrees away from the start point in the curve direction. The Rotate option rotates the construction plane. Pick the start of the rotation axis. Pick the end of the rotation axis. Type the angle to rotate the construction plane.