How do I program my Shaw Direct remote to my TV?

First method:

1. Ensure the TV is powered on.
2. On the top of your remote, press and hold the TV button until the others (AUX, SAT) flash at least 3 to 4 times.
3. Press in the 5-digit code that you noted down.
4. Press POWER button.
5. If the TV turns off, you have successfully programmed your remote with the TV.

How do I program my PVR remote?

1. Press SYS INFO on the front of the receiver.
2. Press and hold SAT until SAT, TV, AUX and VCR light up.
3. Release SAT. It will start to flash.
4. Choose a random number between 0 and 16 and enter it. This will reset the frequency the remote uses to communicate with the receiver.
5. Press #.
6. Press Record.
7. Press Done.

How do I set my remote to my TV?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do I program my Shaw Direct remote to my irc550 TV?

1. Turn on all the electronic devices (TV, DVD, AUDIO) you want to program the remote to. operate. Using the remote control keypad….
2. In this order, press and hold the [ENTER] button, then the [MUTE] button. Hold both buttons down.
3. a. To program your TV, locate the 3-digit code for.

How do you program a Shaw remote control?

On the top of your remote, press and hold the TV button until the others (AUX, SAT) flash at least 3 to 4 times. Press in the 5-digit code that you noted down. Press POWER button. If the TV turns off, you have successfully programmed your remote with the TV.

How do I record with my PVR-Shaw Direct?

A new screen will appear with: “Do you want to record this program?” Use the right arrow key on your remote control to highlight yes and press ENTER. The recording screen will disappear and you will see a pop-up in the top right-hand corner of the screen that says: “Started recording”.

What can you do with a Shaw RF 600 remote?

Compatible with all Shaw Direct satellite receivers, consolidate three remotes into one with the IR/RF 600. The IR/RF 600 Remote Controls are simple to program, easy to use, and can operate up to three (3) devices: satellite receivers, TVs, and AUX devices (e.g., DVD, VCR, audio receivers/amplifiers, CD players, 2nd TVs, etc.).

Why is the SAT button on my Shaw remote not working?

If the incorrect device key glows, press the SAT button on the remote and try again. If no buttons flash, try changing the batteries of the remote. If the SAT button glows but no lights flash on the receiver, it’s possible the remote is on the wrong address.